
Agriculture runs on cycles, and the busiest weeks of the year leave little room for delays. During harvest, a grain elevator may receive hundreds of loads a day, and every minute a truck sits in line is a minute the driver is not picking up the next load.
Fertilizer plants face the same squeeze in spring. When planting season arrives, trucks need to load and leave quickly, and any step that can be automated makes peak demand easier to manage.
Automation can touch nearly every stage of that process, from identifying the truck at the gate to printing the final weight certificate.
How an automated load moves
A typical automated receiving process follows these steps:
- Identification. An RFID tag, license plate reader, access card or bar code identifies the truck, driver and load as it approaches the scale.
- Gross weight. The loaded truck is weighed, and the weight is tied to the order, contract or producer split.
- Grading. Automated equipment tests moisture, test weight and other factors and sends the results directly to the scale system.
- Routing. Based on the grade, signs, lights or gates direct the driver to the correct pit, and the grain is sent to a drying, premium or lower-quality bin.
- Tare weight. The empty truck is weighed again so the tare weight can be deducted from the gross weight.
- Ticketing. A weight certificate prints at the scale or is emailed to the hauler, completing the transaction without the driver leaving the cab.
Identifying the load
The first step in processing a load is knowing who brought it in. Facilities have several ways to do that:
- RFID tags and license plate readers
An RFID tag reader or license plate reader lets the system identify a truck while it waits in line or approaches the first stop. RFID tags are typically mounted on the windshield and work much like the toll transponders highway drivers use. Tolls may not be popular, but at least drivers do not have to slow down.
If the load is scheduled, the system pulls up the relevant information immediately, so the load is applied to the correct order or delivery sheet. If the load is not scheduled, the tag or plate can often identify the producer.
Some trucks deliver for several farmers or carry loads split among multiple producers. In those cases, the initial identification may need to be refined to match the load to the correct farm and application.
Some facilities pair RFID with license plate readers. Tags and plates can both become dirty or unreadable, and a backup identification system helps prevent errors.
- Access cards
Other facilities hand drivers a keycard about the size of a hotel room key or credit card. An operator identifies the driver and links the card to the load being delivered, and the card then tracks the load through the facility.
Depending on the facility’s preference, drivers either return the card when the delivery is complete or keep it for future deliveries.
- Bar codes
For facilities without RFID, bar code scanning offers a lower-cost alternative. A bar code identifying a specific load can be printed on an order, or one identifying the customer or desired application can be printed on a contract.
Bar codes allow rapid identification without the cost of installing an RFID system or license plate reader. They require only a relatively inexpensive scanner and a driver who brings the order or contract.
Automated grading
Once the gross weight of the truck and grain is recorded, the grain must be graded. Moisture and test weight are typically measured by automated testing equipment, which can feed results directly into the scale tracking system through an application programming interface, or API.
Tests once done by hand, such as checks for color or visual defects, can now be done quickly on site with increasingly sophisticated automated grading devices. These devices use near-infrared spectroscopy, machine vision and even artificial intelligence to automate grading. The results help facility managers direct grain to a drying bin, a premium bin or a bin for lower-quality grain.
Tare weight and ticketing
After unloading, the truck is weighed again so the tare weight can be deducted from the gross weight.
Ideally, every step to this point happens without the driver leaving the cab. The final step is a weight certificate printed on a printer the driver can reach through the window. Certificates can also be emailed to the hauler or other parties, making the process fully paperless.
Unattended scales
The fullest form of automation is an unattended scale. Drivers identify themselves and their load at an automated kiosk using any of the methods above, while cameras and positioning software guide the truck onto the scale for weighing and sampling.
Once the sample is tested, directional signs, red and green lights or gates route drivers to the correct unloading location. Weighing the empty truck and issuing the weight certificate complete the transaction.
Automation in practice
These pieces can work together in a facility by identifying incoming trucks with RFID tags or another method, and using monitoring software to track each load by commodity as it moves through the facility, updating gross weight, moisture and other factors in real time. Pit staff can use that information to decide which pit, and ultimately which bin, receives the grain.
Software eliminates the need for radio calls or other manual communication between stations during unloading and grading. Instead of keeping track of the details of a dozen loads at once, operators at every station can check a TV screen or tablet to route grain to the next step.
Fertilizer and feed
For fertilizer plants and feed mills, the product is different but the need for speed is the same.
Outbound loads skip the grading step, but systematically tracking the exact fertilizer mix or feed blend loaded on each truck is essential to delivering the right product.
Time is money
At harvest, or during spring planting for fertilizer sales, speed matters. Automation can increase throughput while reducing errors, leading to higher customer satisfaction and a more profitable facility.
Mike McGeever is the vice president of Grossman Software Solutions (GSS).

















