Feb 04, 2021

January Cattle Inventory, Cattle-on-Feed Reports

source: American Farm Bureau Federation

Last week, USDA released its biannual U.S. cattle inventory report showing U.S. cattle totals as of January 1, following its monthly cattle on feed report the week before that. The reports provide inventory data for the nation’s cattle, including estimates of the number of breeding animals for beef and milk production, as well as the number of animals placed on feed every month. The inventory report showed the total number of cattle and calves slightly below a year ago and mostly in line with expectations, while the monthly on-feed report surprised analysts with bearish placement data.

Cattle Inventory

Overall, the January cattle inventory report does not show any dramatic changes in the trajectory of the cattle industry. As of January 1, all cattle and calves in the U.S. totaled 93.595 million head, slightly below the 93.793 million head reported a year ago. Generally, the levels reported were somewhat in line with industry expectations. This report did include somewhat significant downward revisions to previous years’ estimates, which means production is likely lower than originally thought. These revisions for July 2019, January 2020 and July 2020 were made after reviewing calf crop, official slaughter, import/export data and new survey information.

Jan Inventory Figure 1

Of this inventory, all cows and heifers that have calved totaled 40.6 million head. Beef cows dropped slightly from last year, coming in at 31.2 million head compared to 31.3 million head in 2020, while milk cows were up by 100,000 head over 2020, an increase of roughly 1%. In contrast to beef cows showing a decrease year over year, beef replacement heifers were up slightly over 2020.

At first glance, this is somewhat obfuscating if we are looking at expansion or contraction (although beef cow decline outpaced replacement heifer expansion). Analysts were actually expecting producers to hold back fewer beef heifers for replacement, so this increase was unexpected. Both steers and heifers weighing 500 pounds and over were mostly in line with 2020, with heifers dropping a modest 25,000 head and steers increasing by a bit over 50,000 head.

A bigger story in this report concerned the calf crop for 2020, which USDA pegged at 35.136 million head. Calves born in the first half of 2020 were estimated 25.8 million head, a 1% decline from the first half of 2019. Calves born during the second half of 2020 were estimated at 9.39 million head, meaning the years total was looking at about a 1% decline from 2019.

This report’s calf crop for the first half of 2020 showed a pretty sharp decline from what was initially reported in the July report. Moving forward, this revelation could be supportive of all class prices. Even as the cow herd’s decline was relatively small, fewer calves were produced which could limit fed cattle supplies down the road. This estimated calf crop will be the smallest we have seen since 2016 and continues a downward trajectory.

Jan Inventory Figure 2

Cattle on Feed Report

This report showed a total inventory of 11.965 million head on feed in the United States on January 1. This steady year-over-year number was largely within analysts’ expectations, if at the high end.

Jan Inventory Figure 3

The big surprise in this report was the placement numbers. Placements in December totaled 1.842 million head, 1% above 2019 levels but a shock to analysts who had largely been expecting a decline in the number of placements. This placement number is the 2nd largest total for December since the data series started in 1996. Instead of getting bullish news, the industry got somewhat bearish news from this report for later in the year. Marketings of fed cattle were up around 1%, which was largely in line with expectations.

This report also included placements by weights, and for the most part, we saw placements of heavier cattle increase compared to a year ago. The 900 to 1000 pound category was the largest in terms of gains, up nearly 16% compared to a year ago. Animals in categories from 700 to 900 pounds were also up, with lighter weight classes seeing a decline in placements.

Since the September report, we had largely been of the opinion that we had worked our way through the backlog of animals that had accumulated in late spring as a result of the COVID-19 disruptions at slaughter plants. Since September, the number of animals on feed over 120 days had remained above recent levels but followed seasonal patterns until December when we saw a slight divergence.

This report saw that December pattern continue somewhat. Cattle on feed more than 120 days clocked in at around 4 million head, the largest we have seen since August of last year. Given the typical seasonality that this category follows, we can expect that number to increase over the next few months.

Jan Inventory Figure 4


While the cattle inventory report was relatively in line with expectations, the cattle on feed report contained some surprises. The cattle inventory is largely in line with year-ago levels, with the biggest surprises being revisions in inventory numbers from previous years and a decline in the 2020 calf crop. The cattle on feed report surprised analysts with an increase in placements when most had been looking for a decline. That report also revealed increasing numbers of cattle on feed over 120 days, with that number expected to climb for the next few months.

Michael Nepveux, Economist
(202) 406-3623
[email protected]

Recently Added to Buyer's Guide

VersaMix Triple Shaft Mixers

  • For mixing applications requiring efficient powder dispersion and critical homogenization of medium to high viscosity slurries, pastes, gels, creams and suspensions
  • High-shear mixer with solids/liquid injection manifold (SLIM) technology rotor/stator

GUC-F Controller

  • Multichannel feeding and dosing controller
  • Control solution for feeding and weighing applications in powder handling applications
  • Flexible and modular design with analog and digital load cells


  • Offers accurate and reliable continuous mass flow measurement of bulk solids with an accuracy of +/- 0.5% full scale
  • Measures mass of flowable solids with densities of 10 to 100 pounds/cubic foot and flow rates from 700 to 7,000 cubic feet/hour


  • 10.1” touchscreen
  • Easy to install in new or existing systems

Sanderson Farms Feed Mill Expansion - Kinston, NC

  • Construction of a whole grain silo expansion (76’ diameter x 145’ tall) to hold 500,000 bushels
  • Expansion also includes a 12’x17’x22’ deep boot pit extension at the end of the existing receiving tunnel

Horizon Feed Ordering Automation Platform

  • Automates many processes within supply chain for efficient, sustainable and profitable production
  • Manage all bins and orders on a single software platform


Marketwatch: Jan, 18

US Corn Price Idx: ZCPAUS.CM

open: 5.7667
high: 5.8486
low: 5.7266
close: 5.8288

US Soybean Price Idx: ZSPAUS.CM

open: 13.366
high: 13.376
low: 13.2328
close: 13.2696

US Hard Red Winter Wheat Price Idx: KEPAUS.CM

open: 7.3061
high: 7.3384
low: 7.2334
close: 7.2454

US Soft Red Winter Wheat Price Idx: ZWPAUS.CM

open: 7.0114
high: 7.0566
low: 6.9566
close: 7.0014