New products added on May 01, 2014
Vacuum Retrieval Trailer

Vacuum Retrieval Trailer

Duesway, Inc. | Bulk Feed Bodies | May 01, 2014

  • Dual Purpose trailer capable of Feed Retrieval and Auger Unload
  • Paired with Pneumatic Bin selectors for easy selection of bins during retrieval
  • One of the quickest vacuum retrieval units in the industry
  • Innovative, easy access Mesh Filtration system
[Read More]

New products added on May 01, 2014
Vertical Blenders

Vertical Blenders

Charles Ross & Son Company | Vertical Mixers | April 22, 2014

  • Designed for low-impact blending
  • Conical vessel and a slow-turning screw
  • Agitate a wide variety of materials including powders, granules, pellets, fibers, slurries and pastes
  • Sizes from 1 through 500 cu.ft.
  • Discharge is always virtually 100% complete
  • Unsupported screw design simplifies cleaning and maintenance.
  • Driven by two separate variable-speed motors to 100 rpm and 2.5 rpm, respectively.
  • Cover includes sight glass ports, a 6” charging port, vacuum connection/exhaust, and quick-release clamps 
  • Motorized lift raises and lowers the vacuum-rated conical vessel for complete access during cleaning
  • Can be supplied with a jacket for heating/cooling as well as a lumpbreaker 
[Read More]

New products added on April 22, 2014
New products added on April 22, 2014
Easy-Core

Easy-Core

Maxi-Lift Inc. | Conveying & Material-Handling Equipment | Conveyor Support Systems | April 22, 2014

The Maxi-Lift Easy-Core sets a new precedent in belt core technology with greater strength, longer life and easy installation all in a single plastic core. Created from 100% recycled plastic, the Easy-Core is featured in a 6”x6” size and weighs 3.1lbs.The design features a through hole for use with a threaded shaft, dual locking studs and a squaring line for precise belt alignment. The round corners in the receiver shaft ensure for easier slide in steel wind-up bar. In addition, the Easy-Core is non-sparking, corrosion and moisture resistant, export approved and is ideal for outside storage. 

[Read More]

New products added on April 22, 2014
HIM-306-SS

HIM-306-SS

Munson Machinery | April 21, 2014

Low to high shear required for blending, homogenizing, de-dusting and/or de-agglomerating of dry ingredients, slurries, pastes and difficult-to-blend materials

Coated, hardened stainless steel paddles 

Homogeneous blends can be achieved in as little as 20 seconds residence time, yielding up to 1500 cu ft (42 cu m) of throughput per hour

Insulated, high-pressure jacketed mixing vessel constructed to ASME code can be heated or cooled, and is equipped with four injection ports for adding liquids in small to large amounts

Water or cleaning solution is introduced through the ports before running the machine to dislodge any solids adhering to interior surfaces. 

50 hp (37 kw) motor with totally enclosed high-torque gear reducer and synchronous belt drive, and rotates at variable speeds ranging from 120 to 600 RPM

Large-diameter, solid shaft with 180° adjustable paddles

All material contact surfaces are constructed of #316 stainless steel 

Contact surfaces and/or the entire support structure are also offered in #304 stainless steel, carbon steel and exotic materials

[Read More]

New products added on April 21, 2014
New products added on April 21, 2014
EC-201 Robotic Palletizer

EC-201 Robotic Palletizer

American-Newlong Inc. | Palletizing Systems | April 21, 2014

  • Payload capacity of 440 pounds; palletizing capacity of 1,600 cycles/hour
  • Palletizes bags, cases, pails and other various products
  • Unique design uses less energy, reduces stress on the arm joints, bearings, pivot points and floor supports
  • Standard touch-screen allows personnel to change palletizing programs in under 5 seconds, utilize onboard warning systems, review error occurrences and take corrective measures
  • Can monitor I/O in real time, track inventory by specific programs, and compare running and powered up hours
[Read More]

CIM-24-MS

CIM-24-MS

Munson Machinery | Feed Milling & Grinding Equipment | April 21, 2014

Grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh)

Precision-machined and studded stationary outer disc and a rotating inner disc.

Speeds to 5400 RPM pulverize friable powders, flakes and granules into fine grinds while killing any insects, eggs and larvae

Slower speeds down to several hundred RPM provide coarse grinding and de-agglomerating.

Stationary outer disc can be equipped with flanged, threaded or other fittings for gravity-fed or inline-pneumatic applications

Oversized pillow-block bearings

40 to 60 hp (30 to 45 kw) motor with V-belt/sheave arrangement

Stationary outer disc disconnects using quick-release bolts

Full interior access to both discs for rapid cleaning or sanitizing.

Constructed of mild steel with abrasion-resistant disc pins and durable exterior finish

Available with all material contact surfaces of stainless steel finished, and of abrasion-resistant steel

[Read More]

New products added on April 11, 2014
New products added on April 03, 2014
EC-171 Robotic Palletizer

EC-171 Robotic Palletizer

American-Newlong Inc. | Palletizing Systems | April 03, 2014

  • Delivers speeds up to 20 cycles per minute and is equipped with a built in collision detect system
  • Incorporates the largest working envelope of all Fuji models while maintaining the smallest rotation radius and energy efficiency.
  • Robot allows for work in tight space constrictions while accomplishing a very high rate of throughput
  • No laptop required - has a 10.5-inch color touch screen used for human interface control
[Read More]

New products added on April 03, 2014
DS-9 Bag Closing Machine

DS-9 Bag Closing Machine

American-Newlong Inc. | Bag Closers | April 03, 2014

  • 2,700 rpm, single-needle bag closing machine 
  • Simple, enclosed oil-bath lubrication system 
  • Sealed moving parts for optimum performance 
  • Well-balanced rotational parts for minimum vibration 
  • Works for manual and automatic lines 
  • Air cylinder driven, guillotine-type cutter knife with double springs to ensure fast, smooth cutting for both plain and crepe-tape bound closings
  • Handles a wide range of bagging materials 
[Read More]

New products added on April 03, 2014
New products added on April 01, 2014
BulkSak® FIBCs and more

BulkSak® FIBCs and more

Conitex Sonoco | Bulk Bags | April 01, 2014

  • For over 30 years, BulkSak® has been a trusted FIBC provider through worldwide manufacturing and distribution, with additional production in the USA
  • Our commitment to reliable strength, custom innovation and delivery assurance are the hallmarks of delivering high customer satisfaction
[Read More]

New products added on April 01, 2014
New products added on April 01, 2014
General Preventive Maintenance

General Preventive Maintenance

D. C. Taylor Co. | Maintenance | March 21, 2014

  • D. C. Taylor Co.’s General Preventive Maintenance service cleans, inspects, and repairs minor damage to the roof system
  • Using a standard process and inspection checklist, D. C. Taylor Co. examines and records the condition of the roof to identify defects; minor repairs are made
[Read More]

New products added on March 21, 2014
New products added on March 20, 2014
New products added on March 20, 2014
New products added on March 20, 2014
SwineManagement.com

SwineManagement.com

Progressive Software | Operations Management Software | March 19, 2014

  • Track batch profitability for one or many farms with one or many owners
  • Give barn managers, logistics carriers and other third parties restricted access to your system to achieve more real time inventory numbers
  • Create feed plans and measure their effectiveness
  • Advanced dashboards and user created reports
  • Mobile and Tablet access
  • Feed Mill and Packer uploads
[Read More]

New products added on March 19, 2014
New products added on March 13, 2014
Aeros Business Management System

Aeros Business Management System

Cultura Technologies, LLC | Logistics | March 13, 2014

  • Superior software solutions for businesses in the animal agricultural industry 
  • Manage purchasing, work orders, inventory, accounts payable, general ledger, customer order, logistics & invoicing, accounts receivable, and reporting 
  • Complete end-to-end integration and automation with external systems 
[Read More]

New products added on March 13, 2014
Low Center-of-Gravity Feed Trailer

Low Center-of-Gravity Feed Trailer

Ledwell | Bulk Feed Bodies | March 11, 2014

• Lowers CG by 30” - Vastly improves stability and ride

• Improved discharge speed - 4,500# per minute

• 25 ton payload legal at 80,000# gross

• Air operated top and bottom doors

• Full function wireless remote controls - Driver efficiency and safety

• Operates at a much lower temperature (120 degrees) utilizing the Ledwell Oil Cooler

[Read More]

New products added on March 11, 2014
New products added on March 10, 2014
Model 42C Cylindrical Ribbon Blenders

Model 42C Cylindrical Ribbon Blenders

Charles Ross & Son Company | March 10, 2014

Designed to mix dry powders, wet granulations and paste-like materials

Densities up to 100 lb/cu.ft. 

Sizes run from 1/2 to 1,000 cu.ft.

Standard, sanitary and heavy-duty models

Uniform mixing and heating

Well-balanced axial and radial flow pattern within the batch

Thorough blending and promote near complete discharge

[Read More]

New products added on March 10, 2014
New products added on February 12, 2014
Single Packaging Source For Feed Additives

Single Packaging Source For Feed Additives

Conitex Sonoco | Bags | February 10, 2014

  • For over 30 years, Conitex Sonoco has been a trusted source for industrial packaging solutions
  • Providing worldwide sourcing, manufacturing and distribution, we also offer production in the USA
  • We engineer and manufacture high-performance products including dependable BulkSak® FIBCs and tear-resistant paper bags which are well-suited as packaging alternatives for feed additives
  • Our commitment to reliable strength, quality control and delivery assurance are the hallmarks of delivering high customer satisfaction
  • Add in our constant pursuit of process improvement and you’ll find that Our Bags Are As Dependable As We Are
[Read More]

New products added on February 10, 2014
New products added on January 20, 2014
New products added on January 20, 2014

Page 3 of 42 pages  < 1 2 3 4 5 >  Last ›