none
Tubular Cable Conveyor

Tubular Cable Conveyor

Flexicon Corporation | Conveying & Material-Handling Equipment | Belt Conveyors | May 07, 2014

Flexicon Corporation is now offering its FLEXI-DISC™ line of Tubular Cable Conveyors for fragile materials, integrated with upstream and/or downstream equipment that sources material from single or multiple locations and delivers it selectively to storage vessels, filling machines or other processing equipment. All equipment is factory-tested for seamless integration with the conveyor and the user's process.The FLEXI-DISC™ conveyor moves material using high-strength polymer discs in 4 in. (10 cm) and 6 in. (15 cm) diameters that are affixed to a stainless steel or galvanized cable. The discs glide within smooth stainless steel tubing, moving fragile products gently, quietly and dust-free, horizontally, vertically or at any angle, through small holes in walls or ceilings. The system can have single or multiple inlets and outlets, and convey over short distances or hundreds of feet/meters. Modular system components of 304 or 316 stainless steel include tubing, drive wheel housings, tension wheel housings, metered and non-metered inlets, and discharges with and without valves, as well as accessories for wet or dry cleaning, including CIP sanitizing.

[Read More]

Rotary Airlock Valves

Rotary Airlock Valves

ACS Valves | Conveying & Material-Handling Equipment | May 07, 2014

 ACS Valves introduces a new line of cast iron rotary airlock valves designed to provide to general industry the same primary process optimization benefits typically associated with high-end, specialty-application valve designs. This new line of ACS cast iron rotary airlock valves features the ACS RotorRail™ that enables tool-less access to the rotor and all internal surfaces of the housing without time-consuming disassembly of the rotor, or the removal from service of upstream or downstream equipment commonly associated with standard valve configurations. The ASC cast iron rotary airlock valve with RotorRail™ has shown, when compared to bolt-together housing designs, to reduce rotor service cycle times by 78%; and, as a result, increase total process uptime by 18% during a typical 8-hour operating shift. The ACS RotorRail™ feature of these cast iron valves also ensures accurate rotor re-alignment during re-assembly; thus, eliminating axial shaft movement, bearing wear and seal leakage, and premature, uneven rotor vane wear.

[Read More]

Wireless Proportional Controller & Diagnostic Receiver

Wireless Proportional Controller & Diagnostic Receiver

Duesway, Inc. | May 01, 2014

  • No more herky-jerky motion of the discharge, feather it into its location via proportional buttons
  • Control Raise, Lower, Swivel, Individual and All Augers, Lights, Etc.
  • Receiver Screen displays current hydraulic pressure and has diagnostic capability
  • 300 ft. range with built in safety features such as 3000 PSI shut-off for the discharge
[Read More]

Bulk Feed Bodies

Bulk Feed Bodies

Duesway, Inc. | May 01, 2014

  • Low Maintenance, Superior Quality, Precision Operation
  • 10” Floor Auger / 12.75” Vertical / 10” Discharge (XL Series 10” – 16” – 12” Available)
  • Standard Stainless Steel Hydraulic Lines / High-Pressure Filters
  • Unload times approximately 18-24 minutes per 24 ton load
[Read More]

Vacuum Retrieval Trailer

Vacuum Retrieval Trailer

Duesway, Inc. | Bulk Feed Bodies | May 01, 2014

  • Dual Purpose trailer capable of Feed Retrieval and Auger Unload
  • Paired with Pneumatic Bin selectors for easy selection of bins during retrieval
  • One of the quickest vacuum retrieval units in the industry
  • Innovative, easy access Mesh Filtration system
[Read More]

Vertical Blenders

Vertical Blenders

Charles Ross & Son Company | Vertical Mixers | April 22, 2014

  • Designed for low-impact blending
  • Conical vessel and a slow-turning screw
  • Agitate a wide variety of materials including powders, granules, pellets, fibers, slurries and pastes
  • Sizes from 1 through 500 cu.ft.
  • Discharge is always virtually 100% complete
  • Unsupported screw design simplifies cleaning and maintenance.
  • Driven by two separate variable-speed motors to 100 rpm and 2.5 rpm, respectively.
  • Cover includes sight glass ports, a 6” charging port, vacuum connection/exhaust, and quick-release clamps 
  • Motorized lift raises and lowers the vacuum-rated conical vessel for complete access during cleaning
  • Can be supplied with a jacket for heating/cooling as well as a lumpbreaker 
[Read More]

Easy-Core

Easy-Core

Maxi-Lift Inc. | Conveying & Material-Handling Equipment | Conveyor Support Systems | April 22, 2014

The Maxi-Lift Easy-Core sets a new precedent in belt core technology with greater strength, longer life and easy installation all in a single plastic core. Created from 100% recycled plastic, the Easy-Core is featured in a 6”x6” size and weighs 3.1lbs.The design features a through hole for use with a threaded shaft, dual locking studs and a squaring line for precise belt alignment. The round corners in the receiver shaft ensure for easier slide in steel wind-up bar. In addition, the Easy-Core is non-sparking, corrosion and moisture resistant, export approved and is ideal for outside storage. 

[Read More]

HIM-306-SS

HIM-306-SS

Munson Machinery | April 21, 2014

Low to high shear required for blending, homogenizing, de-dusting and/or de-agglomerating of dry ingredients, slurries, pastes and difficult-to-blend materials

Coated, hardened stainless steel paddles 

Homogeneous blends can be achieved in as little as 20 seconds residence time, yielding up to 1500 cu ft (42 cu m) of throughput per hour

Insulated, high-pressure jacketed mixing vessel constructed to ASME code can be heated or cooled, and is equipped with four injection ports for adding liquids in small to large amounts

Water or cleaning solution is introduced through the ports before running the machine to dislodge any solids adhering to interior surfaces. 

50 hp (37 kw) motor with totally enclosed high-torque gear reducer and synchronous belt drive, and rotates at variable speeds ranging from 120 to 600 RPM

Large-diameter, solid shaft with 180° adjustable paddles

All material contact surfaces are constructed of #316 stainless steel 

Contact surfaces and/or the entire support structure are also offered in #304 stainless steel, carbon steel and exotic materials

[Read More]

Page 3 of 103 pages  < 1 2 3 4 5 >  Last ›