Feed Mill Receiving System 5750
Receiving System Automation Screen
Raw Ingredient Tracking
Designed for low-impact blending
Conical vessel and a slow-turning screw
Agitate a wide variety of materials including powders, granules, pellets, fibers, slurries and pastes
Sizes from 1 through 500 cu.ft.
Discharge is always virtually 100% complete
Unsupported screw design simplifies cleaning and maintenance.
Driven by two separate variable-speed motors to 100 rpm and 2.5 rpm, respectively.
Cover includes sight glass ports, a 6” charging port, vacuum connection/exhaust, and quick-release clamps
Motorized lift raises and lowers the vacuum-rated conical vessel for complete access during cleaning
Can be supplied with a jacket for heating/cooling as well as a lumpbreaker
BD+7 Automatic Heat Sealing Machine
The BD+7 automatic heat sealing machine from American-Newlong, Inc. is suitable for small bags and sacks made of polyethylene and vinyl coated papers.
3CM-P Automatic Bag Filler
The 3CM-P single spout, fully automatic bag filler from American-Newlong, Inc. handles up to 1200 bags per hour of multi-wall paper, polyethylene and woven poly with inner liner bag types.
The Maxi-Lift Easy-Core sets a new precedent in belt core technology with greater strength, longer life and easy installation all in a single plastic core. Created from 100% recycled plastic, the Easy-Core is featured in a 6”x6” size and weighs 3.1lbs.The design features a through hole for use with a threaded shaft, dual locking studs and a squaring line for precise belt alignment. The round corners in the receiver shaft ensure for easier slide in steel wind-up bar. In addition, the Easy-Core is non-sparking, corrosion and moisture resistant, export approved and is ideal for outside storage.
Harvester® Series Precast Concrete Scales
• NTEP Certified for Commercial Use
• Patent-Pending, High-Tensile-Strength Concrete Decks
• 50-Ton Overall Capacity and 25-Ton Concentrated Load Capacity for Most Models
Low to high shear required for blending, homogenizing, de-dusting and/or de-agglomerating of dry ingredients, slurries, pastes and difficult-to-blend materials
Coated, hardened stainless steel paddles
Homogeneous blends can be achieved in as little as 20 seconds residence time, yielding up to 1500 cu ft (42 cu m) of throughput per hour
Insulated, high-pressure jacketed mixing vessel constructed to ASME code can be heated or cooled, and is equipped with four injection ports for adding liquids in small to large amounts
Water or cleaning solution is introduced through the ports before running the machine to dislodge any solids adhering to interior surfaces.
50 hp (37 kw) motor with totally enclosed high-torque gear reducer and synchronous belt drive, and rotates at variable speeds ranging from 120 to 600 RPM
Large-diameter, solid shaft with 180° adjustable paddles
All material contact surfaces are constructed of #316 stainless steel
Contact surfaces and/or the entire support structure are also offered in #304 stainless steel, carbon steel and exotic materials
Simple, Precise Detection On-Site or in the QC Laboratory
Qualitative screening and quantitative detection in just minutes
Segregate raw materials prior to binning or processing
Manage grain and feed quality with greater confidence than ever before.
GIPSA and AOAC-approved mycotoxin testing solution
EC-201 Robotic Palletizer
Payload capacity of 440 pounds; palletizing capacity of 1,600 cycles/hour
Palletizes bags, cases, pails and other various products
Unique design uses less energy, reduces stress on the arm joints, bearings, pivot points and floor supports
Standard touch-screen allows personnel to change palletizing programs in under 5 seconds, utilize onboard warning systems, review error occurrences and take corrective measures
Can monitor I/O in real time, track inventory by specific programs, and compare running and powered up hours
Grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh)
Precision-machined and studded stationary outer disc and a rotating inner disc.
Speeds to 5400 RPM pulverize friable powders, flakes and granules into fine grinds while killing any insects, eggs and larvae
Slower speeds down to several hundred RPM provide coarse grinding and de-agglomerating.
Stationary outer disc can be equipped with flanged, threaded or other fittings for gravity-fed or inline-pneumatic applications
Oversized pillow-block bearings
40 to 60 hp (30 to 45 kw) motor with V-belt/sheave arrangement
Stationary outer disc disconnects using quick-release bolts
Full interior access to both discs for rapid cleaning or sanitizing.
Constructed of mild steel with abrasion-resistant disc pins and durable exterior finish
Available with all material contact surfaces of stainless steel finished, and of abrasion-resistant steel
Reduce manufacturing costs
Extend testing and increase information
3CM-5U High Speed Automated Packaging System
EC-171 Robotic Palletizer
Delivers speeds up to 20 cycles per minute and is equipped with a built in collision detect system
Incorporates the largest working envelope of all Fuji models while maintaining the smallest rotation radius and energy efficiency.
Robot allows for work in tight space constrictions while accomplishing a very high rate of throughput
No laptop required - has a 10.5-inch color touch screen used for human interface control
DS-9 Bag Closing Machine
2,700 rpm, single-needle bag closing machine
Simple, enclosed oil-bath lubrication system
Sealed moving parts for optimum performance
Well-balanced rotational parts for minimum vibration
Works for manual and automatic lines
Air cylinder driven, guillotine-type cutter knife with double springs to ensure fast, smooth cutting for both plain and crepe-tape bound closings
Handles a wide range of bagging materials
LoadRunner® Corrugated Pallets
Our LoadRunner ® engineered corrugated pallets are enhanced alternatives to plastic and wood pallets
While designed to be heavy-duty, they are lightweight for easy handling and reduced freight expenses
BulkSak® FIBCs and more
For over 30 years, BulkSak® has been a trusted FIBC provider through worldwide manufacturing and distribution, with additional production in the USA
Our commitment to reliable strength, custom innovation and delivery assurance are the hallmarks of delivering high customer satisfaction
Commodity XL PhysOps ‘Visual Cockpit
Commodity XL Strategic Planning and Procurement
Commodity XL for Agriculture